November 8, 2022

PU Pre-insulated Pipe Malaysia

pu pre-insulated pipe malaysia

Hot water supply and district heating both make extensive use of PU pre-insulated pipe Malaysia. They are made up of an outer casing, a layer of thermal insulation, and a steel pipe known as a “service pipe.” The primary objective of such pipes is to keep the fluid inside the service pipes at a constant temperature. 

Insulated pipes are frequently utilised for the distribution of hot water within district heating networks as well as the transportation of hot water from district heating plants to district heating networks.

The advantages of insulation in attics and walls are well known to everyone who lives in a cold area. A useful addition to maintain and enhance piping and valve systems is pipe and blanket insulation, which many people might not be aware of.

pu pre-insulated pipe malaysia

Benefits of Pre-insulated Pipes

The damaging issues that can arise if water freezes within the pipes are avoided by adding insulation to the valve and piping systems. The insulation prevents the water from freezing, expanding, and bursting the pipe. That will prevent you from more expensive damage. Additionally, there are other benefits to employing pipe and blanket insulation on pipe and valve systems, albeit this is the most typical one.

Control of Condensation. Corrosion and rust, two very harmful issues, might result from condensation on the pipe’s surface. Pipe insulation can serve as a barrier in moist, humid areas to stop moisture from building up on the piping and reacting with the metal.

Power Savings. The heat gain and loss from the pipes can be significant when there is a large temperature difference between the pipe (and its contents) and the surrounding air. For example, cold water in the pipe warms up in hot air whereas hot water in the pipe loses heat in cold environments. Insulation will reduce the cycle of heat gain and loss. Stop energy from being wasted trying to make up for lost or acquired energy.

pu pre-insulated pipe malaysia

Safety. Pipelines used in industrial settings may operate at incredibly high or low temperatures. If the pipe is too hot or cold, contacting it could be dangerous. Insulation shields employees from burns caused by unintentional contact with the piping. A piping and valve system is made safe from the hazardous situation for employees by insulation.

Noise reduction. Pipework can be a cunning conduit for noise. Insulating the pipelines and valves is an effective way to lessen noise in industrial settings, residential buildings, and commercial structures. It reduces the noise of the materials passing through the systems and serves as an acoustic decoupler by preventing noise transfer when pipes pass through a stationary structure like a wall or floor. 


Lightweight pre-insulated pipes are simple to join and install. They help to decrease energy loss and lower long-term operating expenses. They are ideal for both new construction and retrofitting since pre-insulated pipes are insulated with efficient, high-energy foam.

If you are searching for pre-insulated pipes that are suitable for your construction, find them on UNITRADE today! They supplied the best product out of the best! Visit their website for more information and details about the best pre-insulated pipes for you.